NoteTube

Frequency Response Analysis using Hypermesh [Optistruct Tutorial]
14:46

Frequency Response Analysis using Hypermesh [Optistruct Tutorial]

Aeroswap

5 chapters6 takeaways14 key terms5 questions

Overview

This video tutorial demonstrates how to perform a direct frequency response analysis on a sheet metal bracket using Hypermesh and OptiStruct. The analysis aims to identify the frequencies at which the component experiences maximum vibration within a specified range (0-1000 Hz). The process involves setting up material and properties, meshing the geometry, defining boundary conditions (fixed supports and a unit load), and specifying the frequency range. Finally, the tutorial covers post-processing to visualize displacement and stress contours and plotting a displacement versus frequency graph to pinpoint critical frequencies that should be avoided during the component's operational life.

How was this?

Save this permanently with flashcards, quizzes, and AI chat

Chapters

  • Frequency response analysis observes component behavior under dynamic, sinusoidal loads.
  • The goal is to find the most vibrating frequencies within a given range.
  • This tutorial uses a direct frequency response analysis on a sheet metal bracket.
  • Post-processing will involve plotting displacement versus frequency graphs.
Understanding how a component reacts to varying dynamic loads is crucial for ensuring its structural integrity and preventing failure under operational stress.
Observing the behavior of a sheet metal bracket under dynamic conditions to find its most vibrating frequencies between 0 and 1000 Hz.
  • Import the CAD model into Hypermesh.
  • Create a steel material with default mechanical properties.
  • Define a P-shell property with a 2mm thickness and assign it to the bracket.
  • Mesh the circular hole edges with a density of 12 to ensure good element flow.
  • Mesh the remaining surfaces with 4mm quad elements for a refined mesh.
Accurate material properties and a well-defined mesh are fundamental for obtaining reliable simulation results, as they directly influence how the software calculates the structure's response.
Manually adjusting node density to 12 along the circular edges of the hole locations to create quad elements.
  • Create RBE2 rigid elements on circular edges to serve as master nodes for applying boundary conditions.
  • Fix all degrees of freedom for the master nodes at the corner rigid elements (single point constraints).
  • Apply a unit load in the Y-direction (dof2) to the master node of the center rigid element.
  • Define a frequency-dependent load curve with a constant magnitude of 1 Newton from 0 to 1000 Hz.
Correctly defining constraints and loads simulates the real-world forces and supports acting on the component, which is essential for an accurate analysis of its dynamic behavior.
Constraining the master nodes of the corner rigids in all directions while applying a unit load only in the Y-translation to the center rigid's master node.
  • Create a load step and set the analysis type to 'Frequency Response Direct'.
  • Assign the SPC (single point constraints) load collector for fixed supports.
  • Assign the RLOAD2 load collector for the frequency-dependent unit load.
  • Specify the FRQ1 card to define the frequency range (0-1000 Hz) with 5 Hz increments.
  • Request global outputs for displacement and stress in H3D format for post-processing.
This step configures the solver to perform the specific type of dynamic analysis required, ensuring that the simulation calculates the structure's response across the defined frequency spectrum.
Configuring the FRQ1 card with an initial frequency of 0 Hz, 200 increments, and a 5 Hz step size to cover the 0-1000 Hz range.
  • Export the solver deck as an .fem file.
  • Run the analysis using the Compute Console, allocating 6 processing cores.
  • Open the results in Hyperview using the generated .h3d file.
  • Visualize displacement and stress contours at different frequencies.
  • Plot a displacement versus frequency graph for the center node using Hypergraph.
Visualizing and analyzing the simulation results allows engineers to identify critical frequencies, understand the component's dynamic response, and make informed design modifications to avoid resonance.
Plotting a line chart showing the displacement of the center node (node ID 3558) against frequency from 0 to 1000 Hz to identify peaks.

Key takeaways

  1. 1Frequency response analysis is essential for understanding a structure's behavior under dynamic, oscillating loads.
  2. 2Accurate meshing and material property definition are critical prerequisites for reliable simulation results.
  3. 3RBE2 elements are useful for consolidating boundary conditions and loads onto specific points (master nodes).
  4. 4The analysis setup requires defining constraints, loads, frequency ranges, and output requests.
  5. 5Post-processing involves visualizing results like displacement and stress contours and plotting response curves to identify critical frequencies.
  6. 6Identifying and avoiding resonant frequencies is key to preventing structural failure in dynamic applications.

Key terms

Frequency Response AnalysisDynamic ConditionsSinusoidally Varying LoadsHypermeshOptiStructP-shell ElementRBE2 ElementBoundary ConditionsSingle Point Constraints (SPC)Load CollectorFrequency RangeDisplacement ContourStress ContourResonance

Test your understanding

  1. 1What is the primary purpose of performing a frequency response analysis?
  2. 2How do you set up boundary conditions for a frequency response analysis in Hypermesh?
  3. 3Why is it important to mesh the circular hole edges with higher density?
  4. 4What information can be extracted from a displacement versus frequency graph?
  5. 5How does defining a specific frequency range impact the analysis results?

Turn any lecture into study material

Paste a YouTube URL, PDF, or article. Get flashcards, quizzes, summaries, and AI chat — in seconds.

No credit card required

Frequency Response Analysis using Hypermesh [Optistruct Tutorial] | NoteTube | NoteTube