
13:27
10 Minute Sunglasses Case
Owl Be Sewing
Overview
This video demonstrates how to create a simple sunglass case in approximately 10-15 minutes, suitable for gifts or personal use. The process involves preparing fabric pieces, fusing fleece for structure, sewing them together, rounding corners, and creating a flap closure. Options for closure include a snap or an elastic band with a button. The tutorial covers cutting, sewing, turning the case inside out, topstitching, and installing a snap closure, offering a quick and practical sewing project.
How was this?
Save this permanently with flashcards, quizzes, and AI chat
Chapters
- Gather two fabric pieces (5x20 inches) and one piece of fusible fleece (5x20 inches).
- Fuse the fusible fleece to the wrong side of one fabric piece (the outer fabric) using an iron.
- This provides structure and body to the sunglass case.
Properly preparing the materials ensures the sunglass case will be durable and hold its shape, making it functional for protecting eyewear.
The speaker uses a floral print for the outer fabric and a coordinating solid for the lining, fusing the fleece to the floral piece.
- Place the two fabric pieces right sides together, aligning the 5-inch edges.
- Sew along this edge with a seam allowance of approximately 1/2 inch.
- Round the corners of the fabric piece after sewing the seam to create a softer shape for the case.
Sewing the main body creates the basic structure of the case, and rounding the corners contributes to a neat, professional finish.
The speaker demonstrates rounding the corners by using a piece of tape as a guide to draw a curve, then cutting along the line.
- Fold the sewn fabric piece to determine the flap length, aiming for about 9 inches from the folded edge.
- Align the lining fabric with the outer fabric, ensuring raw edges match.
- Mark an opening on one of the long sides (about 1/2 inch from the edge and 1 inch up from the bottom corner) to allow for turning the case right side out.
This step defines the case's opening and flap, and strategically leaving an opening is crucial for turning the project right side out.
The speaker marks a spot about half an inch past the seam and an inch up from the bottom corner on one of the long, unsewn edges.
- Sew around the entire perimeter of the fabric, starting and ending at the marked opening.
- Trim excess fabric, especially at the seams and curves, to reduce bulk and allow for a cleaner turn.
- Use pinking shears or make small clips on the curves to help the fabric lay flat when turned.
Completing the stitching and preparing the fabric for turning ensures a well-constructed case with smooth edges.
The speaker uses pinking shears to trim the seam allowance, noting that small clips on the curves are an alternative method.
- Turn the case right side out through the opening, carefully pushing out the corners.
- Iron the case flat and topstitch around the edges for a clean finish and to close the opening.
- Install a snap closure on the flap and the main body, or attach an elastic loop and button as an alternative closure.
Finishing touches like topstitching and adding a closure provide a polished look and make the case functional for securing eyewear.
The speaker demonstrates installing a snap using a snap setter tool, poking a hole and pressing the male and female parts together.
Key takeaways
- A sunglass case can be a quick and rewarding sewing project, achievable in under 15 minutes.
- Fusible fleece adds essential structure to fabric projects like cases.
- Rounding corners and trimming seams contribute to a professional and neat finished product.
- Leaving an opening for turning is a critical step in most sewn projects.
- Topstitching not only closes openings but also adds a decorative and structural element.
- Snaps are a common closure for cases, but elastic and buttons offer a viable alternative.
- Careful alignment and precise sewing lead to a better-fitting and more durable final item.
Key terms
Fusible fleeceSeam allowanceRight sides togetherRounding cornersTopstitchSnap closureElastic loopPinking shears
Test your understanding
- What is the purpose of fusing the fleece to the outer fabric?
- How do you prepare the fabric pieces before sewing the main body of the case?
- Why is it important to leave an opening when sewing the case together?
- What are the two main closure options presented for the sunglass case, and how do they differ?
- How can you achieve a neat finish on the curves of the sunglass case after sewing?